welcome to Shenzhen Fortunecome Technology Co,.Ltd.

702


Parameters

Power supply: power supply: AC - 240 v

Charger output: 5 ma-1a

Built-in rechargeable battery: lithium battery 700 mah

Vibration frequency of toothbrush: 40,000 / minute

Noise: not more than 75 db ( a )

Battery cycle charging: > 500 cycles

Each time full of electricity available: 90 minutes.



Configure

Yasi 702 box packing materials

Product size: φ * 249 mm

Product weight: n. w.: 118 g

Color box size: 218 * 79 * 76.5

Each set weight: 332 / set

Inner carton dimension: 24 * 33.5 * 40.5 × 40.5 ( 20 PCs / box )

Carton dimension: 50 * 35.5 * 42.5 ( 40 PCs / box )

N.: 1, kgs,

G.: 14. kgs

Accessories:

Handle 1, teeth 2, USB 1. 1 specification


Introduction

Yasi sound is designed to protect people's teeth and gum health and health and design oral care products.


2.1 the advanced electronic control system makes the operation more simple and convenient.


2.2 strong sound waves can wipe the food debris thoroughly and can't brush ordinary toothbrush.


2.3 gently pulsating sound waves can gently massage the gum, making teeth healthier.


2.4 the five mode of work corresponds to five mode LEDs.


2.5 people Personalized design, use more comfortable.


The 2.6 with recognizable Decorative ring nozzles to achieve the function of a multi-purpose use.


2.7 rechargeable use, environmental protection.


Iii. product identification


Iv. product overview:


3.1 yasi has switches and mode buttons. Switch key between the boot and shutdown. The mode key in 5th gear can also switch the vibration mode arbitrarily.


3.2 the switch is not triggered during work and will be shutdown automatically 2 minutes later.


3.3 yasi uses the telephone plug of the AC power cord ( input: 100 vac, output 5v earth 0.2, current 300 ma — 1a ), charging the battery in the handle via USB cable, chongbao time about 4 hours.


Ⅲ performance


Regular indicators:


1. seal test ( only for the part of the oral irrigator body shall meet the ipx7 standard, and meet any of the following shall be qualified ):


Immersion or bubble water test: the test prototype is placed in 1m deep in water, the test time is 30 minutes. There is no water stain.


2. the handle noise is less than 75 db ( loop mirror noise 49 db, handle from db test head 10 cm, and dashuihua test ).